80 PLUS power supply 400W Desktop PSU RPD400-60HHN(85)
The Product Features
- Worldwide Input Voltage 100Vac-240Vac
- Active PFC Within 0.99 Power Factor Correction
- Single 12V Rail To Fulfill Graphic Performance Demand
- Own Patent IC To Offer High Performance And Efficiency
- 12cm Fan Provide Ultra Silent User Environment
PC PSU Introduction
- Dimension 140 (L) x 150 (W) x 86 (H) mm
- Output Wattage 400W
- Efficiency 82% 85% 82%
The PC PSU DESCRIPTION
This is the specification of Model RPD400-60HHS(85)U; AC-line powered switching power supply with active PFC (Power Factor Correction) circuit, meet EN61000-3-2 and with Full Range Input features. Also, +5Vsb power is less than 0.5Winput at power off mode (PS_ON input at high state) which is comply with ErP Lot 6 year 2013 requirement.
APPLICATION: Desktop
WATTAGE: 450W
DIMENSION : 100mm(L) x 125mm(W) x 63.5mm(H)
PRODUCT HIGHLIGHT
- Efficiency Level: 80PLUS Bronze
- Erp Lot: <0.5W
- Input Voltage: 100~240Vac
INPUT SPECIFICATION
- Input Range: 100-240 Vac
- Input Frequency: 47-63 Hz
- Input Current:115V@ <4.5 Amps-rms 230V@ <2.5 Amps-rms
OUTPUT SPECIFICATION
Output Rise Time:
- + 3.3Vdc : 20ms Maximum
- + 5 Vdc : 20ms Maximum
- + 12 Vdc : 20ms Maximum
- + 5 Vsb : 20ms Maximum
- - 12 Vdc : 20ms Maximum
GENERAL SPECIFICATION
- Efficiency: 80PLUS Bronze
- PWOK Delay Time: 500ms > PWOK > 100ms
- EMC Performance: EN55022 class B
ENVIRONMENTAL SPECIFICATION
- TEMP.Range: Storage Temperature: -20°C to + 80℃
- MTBF:The power supply reliability, when calculated by MIL-HDBK-217;latest revision, are exceed 100,000 hours with all output at Typical load and an ambient temperature of 25℃.
Output Voltage and Current Rating
| |
+3.3V |
+5V |
+12V1 |
+12V2 |
-12V |
+5Vsb |
| Ripple-Noise(R-P) mV |
70mV |
70mV |
140mV |
140mV |
140mV |
70mV |
| Regulation Load % |
±5% |
±5% |
±5% |
±5% |
±10% |
±5% |
| Output Max.(A) |
21A |
22A |
17A |
16A |
0.5A |
2.5A |
| Output Min.(A) |
0.1A |
0.2A |
0.1A |
0.5A |
0A |
0A |
NOTES
( 1 ) +3.3V & 5V total output not exceed 120W.
( 2 ) Total output continuous shall not exceed 400W watts.
This content is subject to change, please refer to specification for more detail.
